Author Topic: human head (Read 16046 times)

ryguy_1617 · « **on:** February 09, 2006, 07:56:02 pm »

Here are a few human head models I did, they're in low-poly; not sure if they would be legit for commercial use though, I used another person's model as a base reference, but I did alot of the details on it myself...dunno. Well, here it is [not as lifelike as what contingency showed me by a longshot lol]:

contingencyplan · « **Reply #1 on:** February 09, 2006, 08:08:31 pm »

No, not nearly. But still, a good start.

ryguy_1617 · « **Reply #2 on:** February 09, 2006, 08:13:16 pm »

Yeah...I would make it higher poly for more details....thus comes into play the issue of the computer. But, I'll mess around with textures until I get the new pc, maybe I'll comeup with a solution there. {this is my first human modeling attempt lol}

Caenus · « **Reply #3 on:** February 09, 2006, 08:57:55 pm »

the white fuzz on the facial hair is a bit of a pain. Otherwise, well done.

ryguy_1617 · « **Reply #4 on:** February 09, 2006, 09:05:07 pm »

yeah...that's supposed to be glossiness...but i think it got a little overdone...especially on the whiskers :-P.

ryguy_1617 · « **Reply #5 on:** February 10, 2006, 03:31:35 pm »

Ok: Second attempt at human head modeling! :-D [still used same undetailed texture atm.]:

Caenus · « **Reply #6 on:** February 10, 2006, 03:34:52 pm »

There should be a crease running from the outside of the nostril to the corner of the mouth, that'll help smooth out the cheek. The nose is far too wide for his bone structure. Try more than anything to get the skin to be perfectly smooth. It looks like modelled clay right now, it should look like a single layer.

All in all, not bad. Nice job getting rid of the white fuzz.

ryguy_1617 · « **Reply #7 on:** February 10, 2006, 03:36:06 pm »

ok, I'll work on that...and yeah, that's what I couldnt think of, the crease goes from the nostril. Thanks.

Caenus · « **Reply #8 on:** February 10, 2006, 03:45:05 pm »

If you want a good idea on nose width realize this:

when you look directly into his face (portrait view) draw lines from the center point on his eyeline (directly between his eyes) to the corners of his mouth (forming a triangle). The two sides of the triangle will touch the outside edge of his nostrils. I'll try to mock up a quick jpg for you.

Also note from the pic that if you do the same trick with the bottom of the nose and the edges of the bottom lip, you will get the exact width of the chin. The eyes have exactly one eye width between them.

ryguy_1617 · « **Reply #9 on:** February 10, 2006, 03:51:01 pm »

Ok, thanks...by using that, [front view] I think I have the proportions about right {once I know the proportions are good, I'll work on the details; EXAMPLE: the dimples, texturing}

ryguy_1617 · « **Reply #10 on:** February 10, 2006, 04:44:39 pm »

And, here is a betterly textured version that I just did:

Caenus · « **Reply #11 on:** February 11, 2006, 01:48:55 am »

BEYOND EXCELLENT!!! Proportions are GREAT!! I'll have to draw out a complete diagram on how to proportion a human head - because it's SUPER mathematical and would be easy to do.

ryguy_1617 · « **Reply #12 on:** February 11, 2006, 06:35:47 am »

Ok, please do. I probably already learned how to do it at some point...but I forgot :-/. So, yeah, that would greatly help

.

Neo · « **Reply #13 on:** February 13, 2006, 10:00:54 pm »

What program are you useing?

ryguy_1617 · « **Reply #14 on:** February 14, 2006, 02:49:39 pm »

erm---3ds max.

ryguy_1617 · « **Reply #15 on:** February 18, 2006, 05:00:33 pm »

Here's a full-body model with a pistol I just finished...--obviously the main body texture can be changed:

contingencyplan · « **Reply #16 on:** February 18, 2006, 11:31:54 pm »

Not bad, though the body looks a little blocky and the transition between the skin and the suit is too abrupt, especially on the hands.

ryguy_1617 · « **Reply #17 on:** February 18, 2006, 11:56:02 pm »

Yeah, that hand to suit thing does look a bit messed up...ok, I'll work on that.

Caenus · « **Reply #18 on:** February 19, 2006, 01:35:46 am »

Bone structure needs work. First chance I get, I'm sketching you a mathematical guide to faces AND bone structure.

ryguy_1617 · « **Reply #19 on:** February 19, 2006, 09:19:12 am »

Ok, sweet.

News:

Author Topic: human head (Read 16046 times)

Neo